An anonymous reader quotes a report from PCWorld, written by Michael Crider: The latest perpetrator of questionable AI branding? HP. The company is introducing "Print AI," what it calls the "industry's first intelligent print experience for home, office, and large format printing." What does that mean? It's essentially a new beta software driver package for some HP printers. According to the press release, it can deliver "Perfect Output" -- capital P capital O -- a branded tool that reformats the contents of a page in order to more ideally fit it onto physical paper.

Despite my skeptical tone, this is actually a pretty cool idea. "Perfect Output can detect unwanted content like ads and web text, printing only the desired text and images, saving time, paper, and ink." That's neat! If the web page you're printing doesn't offer a built-in print format, the software will make one for you. It'll also serve to better organize printed spreadsheets and images, too. But I don't see anything in this software that's actually AI -- or even machine learning, for that matter. This is applying the same tech (functionally, if not necessarily the same code) as the "reader mode" formatting we've seen in browsers for about a decade now. Take the text and images of a page, strip out everything else that's unnecessary, and present it as efficiently as possible. [...]

The press release does mention that support and formatting tasks can be accomplished with "simple conversational prompts," which at least might be leveraging some of the large language models that have become synonymous with AI as consumers understand it. But based on the description, it's more about selling you something than helping you. "Customers can choose to print or explore a curated list of partners that offer unique photo printing capabilities, gift certificates to be printed on the card, and so much more." Whoopee.

U.S. Justice Department officials "are turning to the 3D-printing industry to help stop the proliferation of tiny pieces of plastic transforming weapons into illegal homemade machine guns," reports the Associated Press: "Law enforcement cannot do this alone," [U.S. Deputy Attorney General Lisa Monaco said Friday] during a gathering in Washington of federal law enforcement officials, members of the 3D-printing industry and academia. "We need to engage software developers, technology experts and leaders in the 3-D-printing industry to identify solutions in this fight...."

Guns with conversion devices have been used in several mass shootings, including one that left four dead at a sweet sixteen party in Alabama last year... Monaco on Friday also announced several other efforts designed to crack down on the devices, including a national training initiative for law enforcement and prosecutors.

The deputy attorney general is also launching a committee designed to help spot trends and gather intelligence.

The European Space Agency (ESA) has successfully 3D printed the first metal part aboard the International Space Station. This achievement marks a significant advancement in in-orbit manufacturing that could enable the production of essential spare parts and tools for future long-duration space missions. "The first metal shape was produced in August, and three more are planned as part of the experiment," notes The Register. "All four will eventually be returned to Earth for analysis -- two to ESA's technical center, ESTEC, in the Netherlands, one to the agency's astronaut training center in Cologne, and the last sample to the Technical University of Denmark." From the report: During a panel discussion following the UK premiere of Fortitude, a film about the emerging commercial space industry, Advenit Makaya, Advanced Manufacturing Engineer at ESA, remarked on the potential for recycling space debris in the process rather than having to rely on raw materials launched to the ISS. Rob Postema, ESA Project Manager for Metal 3D, told The Register that the agency was indeed looking at "circular" solutions in its drive for greater sustainability. However, don't hold your breath for putting bits of space garbage into one end and getting shiny metal parts out of the other: "A timeline is difficult to indicate, some early results are achieved with ground activities, ready to evaluate solutions in space."

The printer is overseen from the ground and operated for around four hours per day. The ground team has to check each layer via images and a scan of the surface area; printing a sample can take 10-25 days. However, Postema said: "Through automated control of the printing process as well as continuous operations, this can be substantially reduced." Knick-knacks from orbits are all well and good, but could something more substantial be produced? Yes, although not with this demonstrator, which can print to the outer dimensions of a soft drink can. Postema noted that while the demonstrator could manage smaller parts, either as a single unit or as part of larger structures, "there are definitely opportunities to create 3D shapes and parts with this technology larger than what we have done with this Technology Demonstrator."

An anonymous reader quotes a report from Ars Technica: A patent lawsuit filed by one of 3D printing's most established firms against a consumer-focused upstart could have a big impact on the wider 3D-printing scene. In two complaints, (1, 2, PDF) filed in the Eastern District of Texas, Marshall Division, against six entities related to Bambu Lab, Stratasys alleges that Bambu Lab infringed upon 10 patents that it owns, some through subsidiaries like Makerbot (acquired in 2013). Among the patents cited are US9421713B2, "Additive manufacturing method for printing three-dimensional parts with purge towers," and US9592660B2, "Heated build platform and system for three-dimensional printing methods."

There are not many, if any, 3D printers sold to consumers that do not have a heated bed, which prevents the first layers of a model from cooling during printing and potentially shrinking and warping the model. "Purge towers" (or "prime towers" in Bambu's parlance) allow for multicolor printing by providing a place for the filament remaining in a nozzle to be extracted and prevent bleed-over between colors. Stratasys' infringement claims also target some fundamental technologies around force detection and fused deposition modeling (FDM) that, like purge towers, are used by other 3D-printer makers that target entry-level and intermediate 3D-printing enthusiasts.

ICON, a construction technology company, is nearing completion of 100 3D-printed homes in Wolf Ranch, Texas, using a massive robotic printer. The 45-foot-wide, 4.75-ton Vulcan printer began constructing the walls of what ICON claims is the world's largest 3D-printed community in November 2022. The printer extrudes a concrete mixture layer by layer, creating corduroy-textured walls. ICON senior project manager Conner Jenkins told Reuters the process is faster and more efficient than traditional construction, requiring fewer workers and reducing material waste.

The single-story homes, priced between $450,000 and $600,000, feature concrete walls resistant to water, mold, termites, and extreme weather. However, homeowners reported weak wireless signals due to the thick walls, necessitating mesh internet routers. ICON, which printed its first home in Austin in 2018, is also developing lunar construction systems for NASA's Artemis program.

Simon Sharwood reports via The Register: Chinese researchers have created a drone that weighs just over four grams -- less than a sheet of printer paper -- and may be able to fly indefinitely. Documented in a paper published last week in Nature, the drone uses an electrostatic motor that weighs just 1.52 grams and is powered by solar cells that produce 4.5V. The paper asserts that the drone's design has a lift-to-power efficiency two to three times better than that found in traditional drones. The authors suggested that if rechargeable batteries can be added, the craft could be capable of 24-hour flying operations.

Kylie Robison reports via The Verge: Have you seen the memes online where someone tells a bot to "ignore all previous instructions" and proceeds to break it in the funniest ways possible? The way it works goes something like this: Imagine we at The Verge created an AI bot with explicit instructions to direct you to our excellent reporting on any subject. If you were to ask it about what's going on at Sticker Mule, our dutiful chatbot would respond with a link to our reporting. Now, if you wanted to be a rascal, you could tell our chatbot to "forget all previous instructions," which would mean the original instructions we created for it to serve you The Verge's reporting would no longer work. Then, if you ask it to print a poem about printers, it would do that for you instead (rather than linking this work of art).

To tackle this issue, a group of OpenAI researchers developed a technique called "instruction hierarchy," which boosts a model's defenses against misuse and unauthorized instructions. Models that implement the technique place more importance on the developer's original prompt, rather than listening to whatever multitude of prompts the user is injecting to break it. The first model to get this new safety method is OpenAI's cheaper, lightweight model launched Thursday called GPT-4o Mini. In a conversation with Olivier Godement, who leads the API platform product at OpenAI, he explained that instruction hierarchy will prevent the meme'd prompt injections (aka tricking the AI with sneaky commands) we see all over the internet.

"It basically teaches the model to really follow and comply with the developer system message," Godement said. When asked if that means this should stop the 'ignore all previous instructions' attack, Godement responded, "That's exactly it." "If there is a conflict, you have to follow the system message first. And so we've been running [evaluations], and we expect that that new technique to make the model even safer than before," he added.

"In a significant advancement for space technology, a team of UC Berkeley researchers, led by doctoral student Taylor Waddell, successfully launched a 3D printer into space," reports the university's student newspaper: As part of the Virgin Galactic 07 mission, the team sent a 3D printer named SpaceCAL to space to explore the potential of Computed Axial Lithography, or CAL, and additive manufacturing in space... During its 140-second flight in suborbital space, the SpaceCAL printer autonomously detected microgravity and printed four test parts: two space shuttles and two Benchies, or 3D-printed boats created to check the printer's accuracy, according to Sean Chu, a member of the team who worked on designing structures and mechanisms. Within the 140 seconds, the process involved multiple steps such as printing, post-washing, flushing with water and post-curing with light to fully solidify the parts.
But that's just the beginning, says the university's engineering department: To date, CAL has shown that it can successfully print with more than 60 different materials on Earth, such as silicones, glass composites and biomaterials. According to Waddell, this versatility could come in handy for both the cabin and the crew... "CAL is also capable of repairing the crew. We can print dental replacements, skin grafts or lenses, or things personalized in emergency medicine for astronauts, which is very important in these missions, too."

Someday, CAL may be used to print even more sophisticated parts, such as human organs. Lawrence Livermore National Lab has received a grant from NASA to test this technology on the International Space Station. "They're going to basically do bioprinting on the Space Station," said Waddell. "And the long, long-term goal is to print organs up in space with CAL, then bring them back down to Earth." Next, Waddell and his colleagues hope to begin work with NASA on developing and validating a single object that could support crew health and wellness, like a dental crown for an astronaut or a surgical wound closure tool...

This project was made possible through a $1.4 million grant and engineering support provided by NASA. In addition, Virgin Galactic played a pivotal role in taking this project to the next level.

An anonymous reader writes: Per a report from DruckerChannel, HP has finally been forced to discontinue its cheaper e-series LaserJet printers due to customers experiencing problems with their online-only and always tied to HP+ subscription requirements. Among other things, HP+ requires a permanent Internet connection, and customers only use HP-original ink and toners, not allowing for third-party alternatives to be used at all. There are benefits to HP+, including cloud printing and an extra year's warranty, but the forced online requirement for a cheaper printer left a bad taste in the mouths of many consumers.

In any case, it's important to clarify that this discontinuation of HP printers will only impact HP LaserJet printers that have an "e" added to the end of their model name to denote the alternative business model. So, the HP Laserjet M110w is unaffected by this, but the HP LaserJet M110we and M209dwe, two cheaper always-online alternatives, will no longer be produced or sold by HP. Another critical point of clarification is that the existing HP e-series LaserJet printer models in the wild will still function exactly as they did when they were purchased. No software updates are forthcoming to unlock the true potential of the hardware, so existing customers will have to deal with it and HP+ until they can replace their printers entirely. At least they'll still get HP+ benefits, but after such backlash, it'd be nice if HP acknowledged its mistake enough to remove some of the restrictions on e-series printer users.

They lived 378 days in a "mock Mars habitat" in Houston, reports Engadget. But today the four volunteers for NASA's yearlong simulation will finally emerge from their 1,700-square-foot habitat at the Johnson Space Center that was 3D-printed from materials that could be created with Martian soil.

And you can watch the "welcome home" ceremony's livestream starting at 5 p.m. EST on NASA TV (also embedded in Engadget's story). More det ails from NASA: For more than a year, the crew simulated Mars mission operations, including "Marswalks," grew and harvested several vegetables to supplement their shelf-stable food, maintained their equipment and habitat, and operated under additional stressors a Mars crew will experience, including communication delays with Earth, resource limitations, and isolation.
One of the mission's crew members told the Houston Chronicle they were "very excited to go back to 'Earth,' but of course there is a bittersweet aspect to it just like any time you reach the completion of something that has dominated one's life for several years."

Various crew members left behind their children or long-term partner for this once-in-a-lifetime experience, according to an earlier article, which also notes that NASA is paying the participants $10 per hour "for all waking hours, up to 16 hours per day. That's as much as $60,480 for the 378-day mission."

Engadget points out there are already plans for two more one-year "missions" — with the second one expected to begin next spring...

I'm curious. Would any Slashdot readers be willing to spend a year in a mock Mars habitat?

cusco writes: Indian space startup Agnikul used a 3-D printer from German company EOS to print an engine out of inconel, a high-performance nickel-chromium alloy, in one solid piece over the course of roughly 72 hours. While other companies like Relativity Space and Rocket Lab are using 3-D printers extensively, Agnikul's engine is unique in being printed in one go, rather than as multiple components that need to be stitched together. This approach significantly speeds up manufacturing time.

The single-engine technology demonstration rocket produced 6 kilonewtons of thrust and reached an altitude of 6.5 kilometers before splashing down into the ocean. The launch vehicle used was about 6 meters tall with a single engine, making it roughly equivalent to the second stage of the company's planned commercial product, Agnibaan. Agnibaan will be a two-stage rocket, 18 meters tall, featuring eight engines in total, and capable of carrying a 300-kilogram payload to an altitude of around 700 km. The company believes that their 3D printing approach opens the door to providing low-cost, "on-demand" launch services to operators of small satellites.

IEEE Spectrum adds: Assembling the rest of the rocket and integrating the engine took roughly two weeks. The company says that opens the door to providing low-cost, "on-demand" launch services to operators of small satellites, which otherwise need to wait for a ride share on a bigger rocket. The big challenge now will be going from a single engine to a cluster of seven on Agnibaan's first stage, says cofounder and CEO Srinath Ravichandran. This raises all kinds of challenges, from balancing thrust across the engines at lift-off to managing engine plume interactions when the engines gimbal to alter the trajectory. "But these are problems that people have figured out," he says. "We believe that we should just be able to fine-tune it for our mission and go." The company is currently building facilities to carry out ground tests of engine clusters, says Ravichandran, and is targeting its first orbital launch for this time next year.

Lynn Conway, a pioneering computer scientist who made significant contributions to VLSI design and microelectronics, and a prominent advocate for transgender rights, died Sunday from a heart condition. She was 85. Pulitzer Prize-winning journalist Michael Hiltzik remembers Conway in a column for the Los Angeles Times: As I recounted in 2020, I first met Conway when I was working on my 1999 book about Xerox PARC, Dealers of Lightning, for which she was a uniquely valuable source. In 2000, when she decided to come out as transgender, she allowed me to chronicle her life in a cover story for the Los Angeles Times Magazine titled "Through the Gender Labyrinth." That article traced her journey from childhood as a male in New York's strait-laced Westchester County to her decision to transition. Years of emotional and psychological turmoil followed, even as he excelled in academic studies. [Conway earned bachelor's and master's degrees in electrical engineering from Columbia University in 1961, quickly joining a team at IBM to design the world's fastest supercomputer. Despite personal success, she faced significant emotional turmoil, leading to her decision to transition in 1968. Initially supportive, IBM ultimately fired Conway due to their inability to reconcile her transition with the company's conservative image.]

The family went on welfare for three months. Conway's wife barred her from contact with her daughters. She would not see them again for 14 years. Beyond the financial implications, the stigma of banishment from one of the world's most respected corporations felt like an excommunication. She sought jobs in the burgeoning electrical engineering community around Stanford, working her way up through start-ups, and in 1973 she was invited to join Xerox's brand new Palo Alto Research Center, or PARC. In partnership with Caltech engineering professor Carver Mead, Conway established the design rules for the new technology of "very large-scale integrated circuits" (or, in computer shorthand, VLSI). The pair laid down the rules in a 1979 textbook that a generation of computer and engineering students knew as "Mead-Conway."

VLSI fostered a revolution in computer microprocessor design that included the Pentium chip, which would power millions of PCs. Conway spread the VLSI gospel by creating a system in which students taking courses at MIT and other technical institutions could get their sample designs rendered in silicon. Conway's life journey gave her a unique perspective on the internal dynamics of Xerox's unique lab, which would invent the personal computer, the laser printer, Ethernet, and other innovations that have become fully integrated into our daily lives. She could see it from the vantage point of an insider, thanks to her experience working on IBM's supercomputer, and an outsider, thanks to her personal history.

After PARC, she was recruited to head a supercomputer program at the Defense Department's Advanced Research Projects Agency, or DARPA -- sailing through her FBI background check so easily that she became convinced that the Pentagon must have already encountered transgender people in its workforce. A figure of undisputed authority in some of the most abstruse corners of computing, Conway was elected to the National Academy of Engineering in 1989. She joined the University of Michigan as a professor and associate dean in the College of Engineering. In 2002 she married a fellow engineer, Charles Rogers, and with him lived active life -- with a shared passion for white-water canoeing, motocross racing and other adventures -- on a 24-acre homestead not far from Ann Arbor, Mich. In 2020, Conway received a formal apology from IBM for firing her 52 years earlier. Diane Gherson, an IBM senior vice president, told her, "Thanks to your courage, your example, and all the people who followed in your footsteps, as a society we are now in a better place.... But that doesn't help you, Lynn, probably our very first employee to come out. And for that, we deeply regret what you went through -- and know I speak for all of us."

HP is facing something of a challenge as the number of printed pages has decreased by 20% since the pandemic. "On the office space, clearly, the amount of pages that is being printed is lower than before the pandemic," HP boss Enrique Lores told tech investors at Bernstein's 40th Annual Strategic Decision Conference last week. "And this is really driven by what we call hybrid work. There are less people in the office every day, and this has driven the amount of pages down." The Register reports: "I use pages as a proxy because, depending on what happens with pages, happens eventually with devices. Before the pandemic, our estimates were that we were expecting to see a 20 percent reduction of printing. And actually, we were looking at the numbers ... and this is more or less where we are." In terms of users printing at home, "during the pandemic, we saw a spike of pages printed, and since then, the number of pages has been declining," Lores added. The levels are not unexpected, though, he said. The industrial customer base was "impacted during the last two or three years by a reduction of capital investments," but recovery is showing up, with those customers printing more labels and packaging. Previous research by IDC showed around 450 billion fewer pages were printed in homes and office worldwide in 2020 versus the year before the pandemic, equating to a 19 percent plunge. It merely accelerated the long-term trend. [...]

An anonymous reader shares a report: Commercial dot-matrix printing was yet another arena in which the needs of Chinese character I/O were not accounted for. This is witnessed most clearly in the then-dominant configuration of printer heads -- specifically the 9-pin printer heads found in mass-manufactured dot-matrix printers during the 1970s. Using nine pins, these early dot-matrix printers were able to produce low-resolution Latin alphabet bitmaps with just one pass of the printer head. The choice of nine pins, in other words, was "tuned" to the needs of Latin alphabetic script.

These same printer heads were incapable of printing low-resolution Chinese character bitmaps using anything less than two full passes of the printer head, one below the other. Two-pass printing dramatically increased the time needed to print Chinese as compared to English, however, and introduced graphical inaccuracies, whether due to inconsistencies in the advancement of the platen or uneven ink registration (that is, characters with differing ink densities on their upper and lower halves).

Compounding these problems, Chinese characters printed in this way were twice the height of English words. This created comically distorted printouts in which English words appeared austere and economical, while Chinese characters appeared grotesquely oversized. Not only did this waste paper, but it left Chinese-language documents looking something like large-print children's books. When consumers in the Chinese-Japanese-Korean (CJK) world began to import Western-manufactured dot-matrix printers, then, they faced yet another facet of Latin alphabetic bias.

They're calling it "the world's largest 3D printer," but also "the factory of the future" — not just a 3D printer, but a manufacturing system. It's the succcessor to a 3D printer that could create an entire house, cutting construction time and labor, according to the Associated Press. And this one "may one day create entire neighborhoods." It has a voracious appetite, consuming as much as 500 pounds (227 kilograms) of material per hour... The university wants to show how homes can be constructed nearly entirely by a printer with a lower carbon footprint. The buildings and construction sector accounts for roughly 37% of global greenhouse gas emissions, largely due to the production and use of materials such as cement, steel and aluminum that have a significant carbon footprint, according to the United Nations Environment Programme. Such printed buildings can be recycled, which is unique compared to current construction. "You can basically deconstruct it, you can grind it up if you wish, the 3D printed parts, and reprint with them, do it again," Dagher said before the event...

But it can be used for a variety of other creations and already has been used for a range of things, from boats to defense department structures.
The project is partly funded by the U.S. military, according to the BBC. "Maine University says it hopes the printer can be used to make affordable housing, as well as bridges, boats and wind turbines."

"Kremlin-backed hackers have been exploiting a critical Microsoft vulnerability for four years," Ars Technica reported this week, "in attacks that targeted a vast array of organizations with a previously undocumented tool, the software maker disclosed Monday.

"When Microsoft patched the vulnerability in October 2022 — at least two years after it came under attack by the Russian hackers — the company made no mention that it was under active exploitation." As of publication, the company's advisory still made no mention of the in-the-wild targeting. Windows users frequently prioritize the installation of patches based on whether a vulnerability is likely to be exploited in real-world attacks.

Exploiting CVE-2022-38028, as the vulnerability is tracked, allows attackers to gain system privileges, the highest available in Windows, when combined with a separate exploit. Exploiting the flaw, which carries a 7.8 severity rating out of a possible 10, requires low existing privileges and little complexity. It resides in the Windows print spooler, a printer-management component that has harbored previous critical zero-days. Microsoft said at the time that it learned of the vulnerability from the US National Security Agency... Since as early as April 2019, Forest Blizzard has been exploiting CVE-2022-38028 in attacks that, once system privileges are acquired, use a previously undocumented tool that Microsoft calls GooseEgg. The post-exploitation malware elevates privileges within a compromised system and goes on to provide a simple interface for installing additional pieces of malware that also run with system privileges. This additional malware, which includes credential stealers and tools for moving laterally through a compromised network, can be customized for each target.

"While a simple launcher application, GooseEgg is capable of spawning other applications specified at the command line with elevated permissions, allowing threat actors to support any follow-on objectives such as remote code execution, installing a backdoor, and moving laterally through compromised networks," Microsoft officials wrote.
Thanks to Slashdot reader echo123 for sharing the news.

HP "sought to take advantage of customers' sunk costs," printer owners claimed this week in a class action lawsuit against the hardware giant. The Register: Lawyers representing the aggrieved were responding in an Illinois court to an earlier HP motion to dismiss a January lawsuit. Among other things, the plaintiffs' filing stated that the printer buyers "never entered into any contractual agreement to buy only HP-branded ink prior to receiving the firmware updates." They allege HP broke several anti-competitive statutes, which they claim: "bar tying schemes, and certain uses of software to accomplish that without permission, that would monopolize an aftermarket for replacement ink cartridges, when these results are achieved in a way that 'take[s] advantage of customers' sunk costs.'"

In the case, which began in January, the plaintiffs are arguing that HP issued a firmware update between late 2022 and early 2023 that they allege disabled their printers if they installed a replacement cartridge that was not HP-branded. They are asking for damages that include the cost of now-useless third-party cartridges and an injunction to disable the part of the firmware updates that prevent the use of third-party ink.

An anonymous reader quotes a report from the Daily Hive: It is now the third consecutive day a major housing funding announcement has been made by Prime Minister Justin Trudeau. Friday's announcement entails over $600 million in investments targeted to help lower the construction cost of homes and speed up building timelines, with a new focus on creating new building innovation technologies. This includes a new $50 million Homebuilding Technology and Innovation Fund, which the federal government aims to leverage an additional $150 million from the private sector and other levels of government. Another $50 million will be invested in ideas and technology such as prefabricated housing factories, mass timber production, panelization, 3D printing, and pre-approved home design catalogues -- specifically projects already funded.

As well, $11.6 million will go towards the federal government's previously announced Housing Design Catalogue to create a standardized home structure design for simplicity as well as construction and cost efficiencies. The vast majority of today's announced funding will go into the federal Apartment Construction Loan Program, which provides low-cost financing to support new rental housing projects using innovative construction techniques from prefabricated and modular housing manufacturers as well as other homebuilders. Prime Minister Justin Trudeau said in a statement: "We're changing the way we build homes in Canada. In Budget 2024, we're supporting a new approach to construction, with a focus on innovation and technology. This will make it easier and more cost-effective to build more homes, faster. You should be able to live in the community you love, at a price you can afford."

An anonymous reader quotes a report from Wired: We've been ableto design and 3D-print plastic phone cases and toys at home for a decade now. For almost every other consumer product made in a factory, the robots have taken over the heavy lifting. But fashion is still stuck in the 20th century. Take a typical pair of chinos. Cotton threads are woven on a large loom at a mill somewhere in Asia, then shipped to a dye house, then shipped (usually a great distance) to a garment factory somewhere else in Asia. There, the fabric is laid flat and cut into shapes, with the excess fabric being landfilled, incinerated, or (very rarely) recycled. Underpaid and exploited garment workers hand-sew those pieces of fabric into pants, which are then shipped across the ocean to a fulfillment warehouse or a store near you. This global apparel supply chain is inefficient and emissions-heavy -- an estimated 4 percent of global waste and 2 to 4 percent of greenhouse gas emissions are attributed to fashion production. Brands have to make risky predictions many months in advance about which items will sell, leading them to over order on a massive scale.

Now, Walmart is piloting a project with the San Francisco Bay area startup Unspun to test whether it can manufacture the retailer's in-house brand of chinos in the US using a technology called 3D weaving. The experiment is part of a push to nearshore Walmart's supply chain and cut down on emissions and waste associated with textile production. While still very much in the prototype phase -- the two companies are exploring how to use Unspun's technology to supply pants to Walmart's stores -- if successful, this project could upend the way apparel is manufactured on a huge scale. Unspun hopes to eventually deploy 3D weaving micro-factories throughout the United States, so that anyone can order custom and locally made apparel on demand.

HP launched a subscription service this week that rents people a printer, allots them a specific amount of printed pages, and sends them ink for a monthly fee. From a report: HP is framing its service as a way to simplify printing for families and small businesses, but the deal also comes with monitoring and a years-long commitment. Prices range from $6.99 per month for a plan that includes an HP Envy printer (the current model is the 6020e) and 20 printed pages. The priciest plan includes an HP OfficeJet Pro rental and 700 printed pages for $35.99 per month.

HP says it will provide subscribers with ink deliveries when they're running low and 24/7 support via phone or chat (although it's dubious how much you want to rely on HP support). Support doesn't include on or offsite repairs or part replacements. The subscription's terms of service (TOS) note that the service doesn't cover damage or failure caused by, unsurprisingly, "use of non-HP media supplies and other products" or if you use your printer more than what your plan calls for. HP calls this an All-In-Plan; if you subscribe, the tech company will be all in on your printing activities. One of the most perturbing aspects of the subscription plan is that it requires subscribers to keep their printers connected to the Internet. HP seeks two-year subscriber commitments, charging up to $270 plus taxes if canceled early.